2127A12 HAND LEVER OF MANUAL GEARBOX WITH HYDRAULIC SELECTION - R R - Fiat - PANDA - eLearn

2752672 - 2127A12 hand lever of manual gearbox with hydraulic selection - r r

) Disconnect the battery negative terminal. - 2127A20 cover of control lever/handle for manual gearbox with hydraulic selection - r r - 2127A16 panel of control lever for manual gearbox with hydraulic selection - r r - 7040A28 TRIM on gearbox control panel - R.R.1. Disconnect electrical connections (1a) and (1b).

	Name	Connector
1a	Gear controls	H37

	Name	Connector
1b	Robotized gearbox AUTO function switch	H34

2. Undo the nuts fixing the complete lever.

1. Undo the remaining fixing nut (1a) and remove the complete lever (1b).

1. If necessary, dismantle the lever (1a) from the mounting (1b), undoing the fixing bolts (1c).

Refitting ( Removing

) Working at the bench, fit the lever and mounting and tighten the fixing bolts.Fit the complete lever in its seating and secure it with the fixing nuts.Connect the electrical connections.

	Name	Connector
-	Gear controls	H37

	Name	Connector
-	Robotized gearbox AUTO function switch	H34

- 7040A28 TRIM on gearbox control panel - R.R. - 2127A16 panel of control lever for manual gearbox with hydraulic selection - r r - 2127A20 cover of control lever/handle for manual gearbox with hydraulic selection - r rConnect the battery negative terminal.