2752726 - 3330B24 brake pedal - r r for versions with manual gearbox with hydraulic selection
Removing
(
Refitting
)
1. Working on the rear of the brake pedal, release the retaining
tabs (1a), then release the brake servo pushrod (1b) and release
the brake pedal (1c).2. Remove the fixing clip (2a) and partially remove the brake pedal
fixing pin (2b).3. Remove the brake pedal.Remove the brake servo pushrod retainer.Recover the seat cup for the brake servo
pushrod ball head.
Refitting
(
Removing
)
Fit the seat cup for the brake servo pushrod
ball head in its seating. | After each dismantling operation the black coloured retainer for the brake servo push rod must always be replaced even if it appears to be undamaged. |