3340A30 RPM SENSOR (ONE) OF ONE L/H OR R/H FRONT WHEEL - R+R - Fiat - PANDA - eLearn

2752757 - 3340A30 rpm sensor (one) of one l/h or r/h front wheel - r+r

) Place the car on a ramp.Disconnect the battery negative terminal. - 4450B02 left front wheel r rOr. - 4450B04 right front wheel r r1. Unscrew the fastenings and move the upper part of the dust guard aside.2. Undo the collars and release the rpm sensor cable from the body.

1. Disconnect the electrical connection for the ABS wheel sensor.

	Name	Connector
1	Left front sensor. for ABS	K70

	Name	Connector
1	Right front wheel sensor for ABS	K71

2. Release the electrical wiring from the clips fastened to the body.

1. Undo the bolt securing the front wheel rpm sensor.2. Remove the rpm sensors.

Refitting ( Removing

) Fit the wheel rpm sensor, positioning the wiring correctly.Connect the electrical connector.

	Name	Connector
1	Left front sensor. for ABS	K70

	Name	Connector
1	Right front wheel sensor for ABS	K71

Screw in the rpm sensor bolt.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ABS SYSTEM FRONT WHEEL RPM SENSOR	M6	0.7

Tighten the front wheel dust guard fastenings - 4450B02 left front wheel r rOr: - 4450B04 right front wheel r rConnect the battery negative terminal.Remove the vehicle from the ramp.