4110D35 ELECTRICALLY CONTROLLED STEERING CONTROL UNIT/MOTOR - R.R. - Fiat - PANDA - eLearn

2752787 - 4110D35 Electrically controlled steering CONTROL UNIT/MOTOR - R.R.

) Disconnect the battery negative terminal. - 5580C18 air bag module - r+r

Before working on the Air Bag system, follow the safety instructions for working on the system very carefully (See 5580C - Air Bag System - Precautions).

Before removing the steering wheel, position the wheels as far as possible parallel to the car's longitudinal axis.

- 4110A10 steering wheel - r+r for replacement or checks - 7040A26 steering column trim - r+r - 5550A10 stalk unit assembly - r+r - 4110D20 steering electrical control device - r r . 1. Disconnect the remaining electrical connection (1a) from the electric steering control unit and release the electrical wiring from the band (1b).2. Undo the bolt fixing the electrically controlled steering motor/control unit.

1. Undo the remaining bolts (1a) and remove the electrically controlled steering motor/control unit (1b).

Refitting ( Removing

) Fit the electrically controlled steering motor/control unit back in its housing and secure it by tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ELECTRICALLY CONTROLLED STEERING CONTROL UNIT/MOTOR	-	0.9

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ELECTRICALLY CONTROLLED STEERING CONTROL UNIT/MOTOR	-	0.6

Connect the electrical connection to the electric steering control unit and fasten the electrical wiring using the band. - 4110D20 steering electrical control device - r r . - 5550A10 stalk unit assembly - r+r - 7040A26 steering column trim - r+r - 4110A10 steering wheel - r+r for replacement or checks - 5580C18 air bag module - r+rConnect the battery terminals.Check the operation of the Air Bag system using the Examiner or other diagnostic equipment.