5520A10 IGNITION SWITCH ASSEMBLY - R+R - Fiat - PANDA - eLearn

2752950 - 5520A10 ignition switch assembly - r+r

It is not possible to order a single lock barrel or to order barrels using only the part code. When ordering barrels, observe the special procedure set out in operation 5580 - Special Accessories.

Before working on the Air Bag, it is essential to carry out the following preliminary operations: (1) turn the ignition off and withdraw the key; (2) disconnect the battery terminals and insulate them; (3) wait at least 10 minutes before proceeding.

FOLLOW ALL THE RECOMMENDED SAFETY RULES (see assembly 5508C - AIR BAG SYSTEM).

Removing ( Refitting

) - 5580C18 air bag module - r+r

Before removing the steering wheel, position the wheels as parallel as possible to the car's longitudinal axis.

- 4110A10 steering wheel - r+r for replacement or checks - 7040A26 steering column trim - r+r - 5580E08 aerial for alpha code - r r - 5550A10 stalk unit assembly - r+r

The clock spring is fitted with a device which automatically stops its rotation when it is removed. Avoid forcing its rotation.

If the clock spring is reused, as a precaution it is advisable to secure the two plates in an appropriate manner, to prevent them from accidentally rotating.

1. Disconnect the electrical connections.

	Name	Connector
1	Ignition switch	H1A

	Name	Connector
1	Ignition switch	H1B

2. Using a drill with a suitable bit (2a), remove the shear bolts (2b) of the ignition switch complete with lock barrel.

1. Remove the ignition switch complete with lock barrel.

Refitting ( Removing

) Fit the ignition switch complete with lock barrel.Screw on some new shear bolts.Connect the electrical connections.

	Name	Connector
-	Ignition switch	H1A

	Name	Connector
-	Ignition switch	H1B

- 5550A10 stalk unit assembly - r+rCheck that the steering column switch unit is not damaged and, if necessary, conduct an electrical test on it. - 5580E08 aerial for alpha code - r r - 7040A26 steering column trim - r+r - 4110A10 steering wheel - r+r for replacement or checks - 5580C18 air bag module - r+rConnect the battery terminals.Check the operation of the Air Bag system using the Examiner or other diagnostic equipment.