5520B10 STARTER MOTOR - R+R - Fiat - PANDA - eLearn

2752954 - 5520B10 starter motor - r+r

) Place the car on a lift.Disconnect the battery negative terminal.Raise the car.1. Open the protective cover.2. Undo the fixing nut (2a) and disconnect the starter motor electrical wiring (2b).

	Name	Connector
2b	Starter' motor	A20A

	Name	Connector
2b	Starter' motor	A20B

	Name	Connector
2b	Starter' motor	A20C

3. Undo the fixing bolts (3a) of the starter motor (3b) and remove it.

Refitting ( Removing

) Fit the starter motor in place and tighten the fixing bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ALTERNATOR ASSEMBLY	M8	2.7

	Name	Connector
-	Starter' motor	A20A

	Name	Connector
-	Starter' motor	A20B

	Name	Connector
-	Starter' motor	A20C

Close the starter motor wiring protective cover.Lower the vehicle.Connect the battery negative terminal.Remove the vehicle from the ramp.