2753008 - 5580C14 air bag ecu - r+r

Before removing and refitting the Air Bag control unit, the following preliminary operations must be carried out: (1) turn the ignition off ('STOP') and remove the key; (2) disconnect the battery terminals and insulate them; (3) wait at least 10 minutes before proceeding.

FOLLOW ALL THE RECOMMENDED SAFETY RULES (see assembly 5508C - AIR BAG SYSTEM).

Removing ( Refitting ) 1. Disconnect the Air Bag control unit electrical connections.

	Name	Connector
1	Air bag control unit	M60A

	Name	Connector
1	Air bag control unit	M60B

2. Undo the nuts securing the Air Bag control unit to the floor.3. Remove the Air Bag control unit. Refitting ( Removing ) Follow these precautions:

Handle the Air Bag control unit with extreme caution, making sure that it does not sustain impacts that would render it unusable. Ensure the battery is disconnected.

If a new control unit is being fitted, attach the labels. Remove the removable part of the adhesive label from the new control unit and place it in a special file containing the vehicle details (model, registration date, chassis number) and the serial number of the old control unit. This file should be kept for future checks. A new label is supplied together with the module, to be stuck on top of the existing one. However, it should first be perforated to indicate the month and 14years after the year when the module is fitted (e.g. 2017will correspond to 2003). Secure the Air Bag control unit and tighten the fixing nuts to the floor.Connect the Air Bag control unit electrical connections.

	Name	Connector
-	Air bag control unit	M60A

	Name	Connector
-	Air bag control unit	M60B

Connect the battery terminals.Check the operation of the system using the Examiner or another tester.