5580H06 WIRING OF PARKING SENSOR SYSTEM R R - Fiat - PANDA - eLearn

2753019 - 5580H06 wiring of parking sensor system r r

) Disconnect the battery negative terminal.Place the car on a lift.1. Disconnect the electrical connections (1a) for the parking sensors (1b).

	Name	Connector
1a	Parking sensor unit	K97A

	Name	Connector
1a	Parking sensor unit	K97B

	Name	Connector
1a	Parking sensor unit	K97C

	Name	Connector
1a	Parking sensor unit	K97D

1. Release the coupling for the parking sensor wiring (1a) from the mounting bracket (1b).

1. Disconnect the electrical coupling between the rear wiring and the parking sensor wiring.

	Name	Connector
1	Join for parking sensor	D89

Release the electrical wiring for the parking sensors from the retaining clips and remove it from its housing.

Refitting ( Removing

) Check the condition of the electrical wiring.If necessary, carry out any continuity checks. If the wiring is damaged, proceed with replacing it.Fit the electrical wiring in place, securing it to the retaining clips.Connect the electrical coupling between the rear wiring and the parking sensor wiring.

	Name	Connector
-	Join for parking sensor	D89

Fit the coupling for the parking sensor wiring to the mounting bracket.Connect the electrical connections for the parking sensors.

	Name	Connector
-	Parking sensor unit	K97A

	Name	Connector
-	Parking sensor unit	K97B

	Name	Connector
-	Parking sensor unit	K97C

	Name	Connector
-	Parking sensor unit	K97D

Connect the battery negative terminal.Remove the vehicle from the lift.