7210E38 R.R. REAR SIDE DOOR - Fiat - PANDA - eLearn

2753360 - 7210E38 R.R. REAR SIDE DOOR

) Disconnect the battery negative terminal.1. Disconnect the electrical connection.

	Name	Connector
1	Rear left door connection	D35

	Name	Connector
1	Rear right door connection	D36

2. Undo the bolt fixing the door check strap.3. Unscrew the hinge retaining bolts.

Lift up the rear door and remove it.

Refitting ( Removing

) Check that the rear door is not damaged.If necessary touch up the paintwork.Position the rear door on the hinges.Tighten the bolts fixing the hinges to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR SIDE DOOR	M6	1.5

Tighten the bolt fixing the door check strap to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR SIDE DOOR	M8	2.5

Connect the electrical connection.

	Name	Connector
-	Rear left door connection	D35

	Name	Connector
-	Rear right door connection	D36

Check the alignment of the rear door and, if necessary, carry out the following procedure: - 7010A14 rear side door - adjust centering and moulding - includes adaptation of hinges and seals on door compartmentConnect the battery negative terminal.