2752763 - 3340B52 pump/central obs pipe - r r
Removing
(
Refitting
)
Place the car on a ramp.Remove the protective cap on the brake
caliper bleed valve.Connect the collection system (pipe and
reservoir) to the bleed valve on the brake caliper.Operate the brake pedal until the brake
fluid reservoir is empty. - 5530B10 battery - r+r1. Unscrew the ABS rigid pipe connector.2. Open the retaining clips and release the rigid pipe from the
master cylinder to the ABS control unit.3. Unscrew the rigid pipe connector on the master cylinder.4. Remove the rigid pipe from the master cylinder to the control
unit.
Refitting
(
Removing
)
Fit the rigid brake pipe from
master cylinder to ABS control unit.Tighten the rigid brake pipe connector
to the master cylinder. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Connector | BRAKING SYSTEM FITTING/S | M10 | 1.6 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Connector | ABS CONTROL UNIT RIGID FRONT BRAKE PIPES../ | M10 | 1,6 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Connector | ABS CONTROL UNIT RIGID FRONT BRAKE PIPES../ | M12 | 1.6 |