169000025 - 5580P CONNECT PANEL
CONNECT NAV + DESCRIPTION
Dimensions: 2DIN box with front panelModules included:
- Radio
- CD player - Audio + CD - MP3 ROM
- GPS navigation system module
- GSM phone module
- Independent navigation with maps
- Independent navigation with maps
- Assistance services
- 256 colour 6.5" TFT display
- External CD CHANGER system (if present)
- Built-in voice recognition module
- WAP protocol
Internal modules
The system modules or the modules to which the system can be connected for obtaining information or requesting services are different.Cd rom playerCONNECT is equipped with a CD ROM player that is able to read and manage CD ROMs and audio CDs. The Audio media may be normal commercial audio CDs or CD ROMs containing files in MP3 format (all levels). Other acceptable ROM media include official Marelli media that contain an updated copy of the CONNECT management software and also the map database required for navigation.Cd changerCONNECT is also designed to be connected to an external CD Changer and to accept analogue audio output.Gsm moduleThe CONNECT system is equipped with a GSM Dual Band module and micro format SIM Card reader (that allows the user the insert a SIM Card). There is also an external microphone (for hands free use and voice recognition) and preparation for the connection of a hand set.Radio - cd moduleGeneral specifications:
- Music audio power: 4x35W
- 5 band graphic equalizer
- Easy to manage menu for the adjustment of the radio settings and any external interfaces (CD-Changer)
- Remote control from the steering wheel
- Possibility of interface with external CD-Changer via ASCI-BUS line.
- Volume control according to the speed (via CAN)
- If a voice recognition module is fitted, several of the commands can be voice-activated.
Radio specifications:
- RDS
- RDS - TMC (Traffic Message Channel)
- EON (Enhanced Other Network)
- TA (Traffic Announcements)
- Tuning on the following bands: USW (87.5- 108 MHz) (FM), MW (153- 279 kHz) (AM), LW (531- 1602 kHz) (AM)
- Possibility of programming: 24 FM stations (including 6 stored by autostore), 6 MW stations, 6 LW stations, 6 stations that can stored by autostore on the MWST band.
- 2 scan modes (short lislten to a station and automatic transfer to the next): Scan on the frequency band used; Scan of stored stations.
- Possibility of selecting programmes via PTY (on FM bands only).
- Local/Distant setting.
Audio specifications:
- Bass
- Balance
- Fader
- Loudness
- Treble
- HI-FI system active control
- 5 equalizing curves: BEST (manufacturer''s equalizing data) Rock, Jazz, Classical, MANUAL (can be set using 5 band graphic equalizer)
- Soft mute.
CD specifications:
- Motorized loading and ejection
- TPM function (Track Program Memory)
- Shuffle function
- Repeat
- Skip
- Pause
- Compression: activates the CD noise dynamic reduction circuit
- CD Naming: CD identification (max 30, including CDC).
MP3 CD specifications:
- Play List function (such as TPM for Audio CD)
- Functions associated with the Play List: Scan, Repeat (one or all tracks), Pause, Skip
- Maximum number of MP3 tracks considered for each CD: 999 (if the number of MP3 files contained in the CD ROM is higher than this limit, only the first 999 will be considered).
- Compression: activates the CD noise dynamic reduction circuit.
CD Changer specifications
- Scan function
- Repeat track or entire cartridge function
- Shuffle CD or shuffle all function (one CD or all CDs)
- CD Naming:
- Compression: activates the CD noise dynamic reduction circuit
- Management of controls from steering wheel
- The audio module can be managed by the buttons on the steering wheel.
Management of controls from steering wheel
- The audio module can be managed by the buttons on the steering wheel.
System activation
The CONNECT system may be activated in two different modes:
- Automatic activation with the ignition key ON
- Manual activation by means of ON button
- Emergency manual activation by means of SOS button
With the ignition key in STOP position, the CONNECT system comes on when the ON button is pressed to make the following modes available:
- MAIN
- AUDIO
- NAV
- TEL
- SOS and SERVICE (Targasys)
 | In this mode, the SETUP and TRIP modules can be activated but it is not possible to validate any parameter change, language change or measurement unit change or any other type of adjustment envisaged by the CONNECT system. These limitations are normal when the system is activated by means of the ON button. When the vehicle is not running (key OFF), the data transmission devices inside the vehicle are not operational. When ignition key is turned ON, the system begins to work. |
System deactivation
The CONNECT system may be activated in two different modes:
- deactivation independent of the ignition key
- deactivation dependent on the ignition key
| With the ignition key OFF, the system deactivates with a delay of 20 minutes if a system destination has been set or if a phone conversation is in progress. |
Languages available
The following languages are available for both strings of displayed text (menus) and navigation voice messages: Italian, English, French, German, Spanish and Portuguese.The voice recognition unit language may be set independently of the menu and navigation message language. The same languages are available.FRONT OF THE CONNECT NAV+
Front view
.
Key to pushbuttons
There are 28 buttons and two rotary selectors (a wheel and a pushbutton) on the front panel of the CONNECT.Some keys perform multiple functions that depend on the system operating conditions active at that time.Activation of the selected function is controlled, in some cases, by the length of time for which the button is pressed (short or long push) as described in the following table.| Key | Short press on key (less than 2 second) | Prolonged press on key (longer than 2 seconds) |
|---|---|---|
| 1 | Activation or interruption of the Voice Recognition function | Activation or interruption of the Voice Recognition function. Activation of the Voice Memo function, this can be interrupted by a further short or long press on the button |
| 2 | Choice of audio source:FM1/2/3/AST –MW/LW/AMAST – CD – CDC | - |
| 3 | - Send the selected phone call- Reselect the last number dialled and then press the key with 5 seconds to send a call to the number- Accept incoming phone call | - Refuse incoming phone call- Stop dialling a new phone number- Interrupt a phone call already in progress |
| 4 | Activate TRIP on-board computer mode | - |
| 5 | Radio mode: search for the first radio station at a lower frequencyCD mode: select the previous track.MP3 mode: select the previous track. | Radio mode: activate scanning function for lower frequencies, station scanning will stop at the first station with an audible signal.CD mode: select the previous track.MP3 mode: move to the previous 10 tracks or the previous folder. |
| 6 | Radio mode: search for the first radio station at a higher frequencyCD mode: select the next track.MP3 mode: select the next track. | Radio mode: activate scanning function for higher frequencies, station scanning will stop at the first station with an audible signal.CD mode: select the next track.MP3 mode: move to the next 10 tracks or the next folder. |
| 7 | CD housing | - |
| 8 | Eject navigation CD-ROM or audio CD | - |
| 9 | Play/stop for CD/CDC | Pause for CD/CDC |
| 10 | SIM CARD housing eject key | - |
| 11 | SIM CARD housing | - |
| 12 | Activate SOS mode (assistance functions and services) | - |
| 13 | Targasys mode activation | - |
| 14 | Exit from a selection menu or leave a submenu of a higher menu | - |
| 15 | Knob for selecting the required function. Press to confirm | - |
| 16 | Multifunction key. Function depends on active mode.The function is always identified by graphic buttons that appear on the display. In some cases, the graphic button area may cover one or more adjacent multifunction keys: the function of the keys under this area is the same | - |
| 17 | Knob for adjusting volume level. Press to turn the system on/off | - |
| 18 | Activate navigation mode | Activate/deactivate the MUTE function for navigation information |
| 19 | Activate phone mode | Phone on/off |
| 20 | Activate Audio mode | Activate/deactivate the MUTE function for audio sources |
| 21 | Activate Main mode | Dark mode: The display is darkened completely.The display is lit again by pressing the MAIN, TEL, SOS buttons or by receiving a phone call |
MAIN FUNCTION
The following modules become available when the system is turned on:
- AUDIO
- NAV
- TEL
- TRIP
The dedicated phone module window includes:
- network provider
- an envelope icon that indicates an unread text message;
- an arrow icon to indicate that call transfer is active
The audio source window includes:
- in Radio mode: the current station band, frequency and RDS message.
- In CD/MP3/CDC mode: display of the active source CD or CD1-10 or MP3, track or MP3 file number playing and playing time.
Code activation and recognition procedure
The Connect (NIT) includes an ANTITHEFT function that prevents it operating in the case of theft.The NIT is installed during producition and connnected to the CAN network in order to establish communication with the Body Computer and store an antitheft code known as the Exchange Code.At each subsequent Key On (and even if the battery is disconnected), an automatic authentication procedure is repeated: if the Exchange Code check is positive, the system begins to operate. If the codes compared are not the same, a message appears on| ... DATA ERROR - CROPPED TEXT | Ошибка данных - Текст обрезан ... |
|---|
The module manages text messages for the user and also from the Service Provider. It is therefore possibile:
- to display received messages that have not yet been read (full list or selected message).
- to display received messages that have been read or saved (full list or selected message).
- save a received message.
- delete a message (recently received or already saved).
- send a message to a particular number entered by the user.
- set up the Service Provider number for text messages.
It is possible to obtain information on:
- aerial signal quality
- network operator''s name
- presence of text messages received but not yet read.
For example, the following functions may be shown:
- Next, Help, Back: key presence, number and functions depends on card content.
- The softkey "Card list" allows direct access to a card in the deck that has been loaded.
The lower bar shows browser functions that can be activated by means of the reconfigurable keys, described below:
- “Home”: access to the page set up as Home.
- "Previous": shows the previous card.
- “GO”: access to the specified page (insert address or bookmark).
- "In phonebook": saves the current address in the user bookmark file.
- cursor up, cursor down: up/down to scroll within a text window. If the card cannot be displayed in a single screen (the position in the page is displayed by the scroll bar on the left).
Procedure for general use
Before the phone module can be used, the user must enter a PIN security code whenever the CONNECT system is turned on after being turned off (unless "exclude PIN request" has been set under Settings). Unless the PIN code is entered, the system can be used only for emergency calls (112 in Italy) and not normal user calls or for the Service Call function.If an incorrect PIN is entered three times, the module is bound to request the PUK code to release the block.Management of controls from steering wheelThe phone module can be partly controlled by the buttons on the steering wheel.Audio status repetition on the control panel displayThe CONNECT module sends various information to the control panel via the CAN network on phone section operating status.Voice recognition
Voice recognition module with speaker dependent functions (Phonebook, Navigation address book, Radio Station memory) and speaker independent functions for Radio, CD, CDC, Phone and Services, Navigation System. The speaker dependent function allows a voice command (prerecorded by the user) to be associated with a phone number in the phonebook, a stored radio station or a destination present in the destination list (personal).The speaker independent functions allow the activation of general controls (e.g.: "Radio Autostore", "CD play", "Navigatore Zoom", ...).Voice commandAfter pressing the VR key, the user can speak a voice command. The module compares the sample with those present in its memory and, if recognised, allows the relevant command to be activated (call one fo the phone numbers in the phonebook, select one of the preset stations as an audio source, start the autostore procedure for the radio stations in the current band, change to CD source, etc...) The system guides the user using voice information (Example - After pressing the VR key, the user says: "Call number" and the Connect responds: "Number please").Speaker dependent functionsRECORDING RADIO VOICE COMMAND: When storing a radio station in one of the positions available in the radio bands (FM1, FM2, FM3….), the user can associate it with a voice command. Upon the user''s request, this gives rise to an initialisation stage when the module asks for a voice command to be entered and repeated and then confirms recording.RECORDING PHONE (NAVIGATION SYSTEM) VOICE COMMAND: When entering a number and associated name in the phone book the user can associate a voice command with this item in the same way as with the radio stations.RECORDING NAVIGATION SYSTEM VOICE COMMAND: When entering a destination in the navigation system address book the user can associate a voice command with this item in the same way as with the radio stations.DELETING A VOICE COMMAND: The voice commands described above may be deleted or modified.Speaker independent functionsThe system does not require an initialisation stage to use this function (i.e. recording of voice samples by the user). Although the terminology has been designed to include commonly used phrases, it is nevertheless advisable to read the keyword table in the Connect User Handbook. As an example, the keywords for the CD player are given below.LANGUAGES AVAILABLE: The following languages are availalbe for requests and communication with the user: Italian, English, French, German, Spanish and European Portuguese.Record voice messagesThis module, known as the Voice Memo, allows the user to record and re-enter voice messages up to 3 minutes long. The messages are recorded sequentially in the frame and a warning message is displayed if the memory contains messages.Recording: the recording activated by the user can last up to 3 minutes and terminates automatically when the available time is up. The user can interrupt the recording manually in any case.Voice memoThe following functions are available:
- Play: plays the message
- Stop : interrupts playback or recording
- SKIP : skips to the next message
- SKIP : skips to the previous message
- Record: Starts recording
- Delete: clears the message memory (individual frames cannot be deleted).
Operation
Once the phone module is activated, it is always possible to make emergency calls to 112 regardless of whether a SIM card is present or a PIN has been entered.When the Telephone module has been activated and no valid SIM card has been inserted, a warning message appears on the screen.Insertion of a valid SIM card makes the phone operational and gives access to its functions.The card must be inserted in its seat with the chip at the front and to the right in relation to the car''s direction of motion.Correct SIM card insertion activates a request to enter the PIN code, as shown in the following figure. | Extraction of the SIM card with the phone active may give rise to temporary malfunction. In this case, turn off the phone by means of a long press on the TEL key or turn off Connect using the ON button before removing the SIM card. |
A menu with these items appears on the right side of the display:
- OTHER MENUS
- FREQUENT NUMBERS
- LAST NOS RECEIVED
- LAST NOS CALLED
- ADDRESS BOOK
- WAP
- VOICE MEMO
The Telephone Module functions are the same as for a mobile phone, i.e. in addition to PIN code input/update and emergency calls without a SIM card, the following are also available:
- call-up of phone numbers saved on the SIM card
- input of a new phone number on the SIM card
- deletion of a phone number from the SIM card
- information on SIM card status (correct or incorrect input)
- list of the last 10 numbers dialled
- list of the last 10 calls received
- text messages
- DTMF settings
- select network access provider
- set incoming call volume
- display remaining credit in the case of prepaid SIM cards
- display signal field intensity and other status reports by means of icons and messages
| In the case of complex sites with lots of graphics, the result on the mobile display could be illegible. |
| Refer to the Owner''s Handbook for user instructions. |
When in OTHER MENUS, select
| ... DATA ERROR - CROPPED TEXT | Ошибка данных - Текст обрезан ... |
|---|