169000631 - Z81 COMMUNICATION WITH FAILURE WARNING LIGHTS ERROR

The diagnostic equipment signals the following error: "C1107 Communication with failure warning lights"

This error is signalled if there is an error in the B-CAN between the Body Computer and the instrument panel or if one of the warning lights (EBD, ABS, ASR or ESP) is faulty

1	PANEL INITIAL CHECK	All OK	Problems encountered	Operation
	Turn the key ON and check that the instrument panel carries out the initial check on the warning lights	Move on to Step 2 1	One or more of the warning lights do not come on	Replace the instrument panel    Op. 5560B10 ANALOGUE CONTROL PANEL - R+R Move on to Step 4
3	ELECTRICAL CONNECTIONS CHECK	All OK	Problems encountered	Operation
	Check that the instrument panel is correctly connected to the CAN network    See E4010 INSTRUMENT PANEL	Move on to Step 4 1	Electrical connections faulty	Restore the correct connections, if necessary, replace the instrument panel.    Op. 5560B10 ANALOGUE CONTROL PANEL - R+RMove on to Step 4
4	CHECK ON CORRECT OPERATION	All OK	Problems encountered	Operation
	Clear the errors using the ExaminerCarry out a road test    See Test 3340OA A.B.S. SYSTEM ACTUATION CHECKto ensure that the control unit checks whether there are any errors still present.Return to the workshop and check that the fault is no longer present using the diagnostic equipment	End of diagnosis