169000697 - Z87 NON-CALIBRATED LONGITUDINAL ACCELERATION SENSOR ERROR

The diagnostic equipment signals the following error: "C1435 - Longitudinal acceleration sensor not calibrated"

This error is signalled if the acceleration sensor has not been calibrated

1	LONGITUDINAL ACCELERATION SENSOR CALIBRATION	All OK	Problems encountered	Operation
	Connect the Examiner, enter diagnostic mode and select the longitudinal acceleration sensor. Calibrate the sensor by following the procedure described.	Move on to Step 2 1	The sensor cannot be calibrated	Replace the sensor    Op. 3350E31 SENSOR FOR LONGITUDINAL ACCELERATION (HILL HOLDER) - R.R .Move on to Step 2 1
2	CHECK ON CORRECT OPERATION	All OK	Problems encountered	Operation
	Delete the errors using the diagnostic equipment.Carry out a road test    See Test 3350EA ESP SYSTEM ACTUATION CHECKto ensure that the control unit checks whether there are any errors still present.Return to the workshop and check that the fault is no longer present using the diagnostic equipment	End of diagnosis	The fault persists	Move on to Step 1 1