2751061 - I90 FOLLOW ME HOME FUNCTION IS NOT ACTIVATED

The dipped headlamps are working properly.

This function allows the dipped headlamps to be kept on after the key has been turned off for 30 secs. or multiples thereof (max. 120 secs) depending on the number of times the headlamp flasher lever is operated.

		Results of the tests
0	PRELIMINARY CHECKS	All OK	Problems met	Operation
	With the ignition in the ON position, check that the headlamp flasher is working properly.	Continue to Step 2	The flasher is not working.	Continue to Step 1
1	CHECKING OPERATION OF THE STEERING COLUMN SWITCH UNIT	All OK	Problems met	Operation
	Check the condition of the 'Follow me home' function circuit (steering column switch unit headlamp flasher). See E2012 MAIN BEAM HEADLAMPS	Continue to Step 2	Circuit damaged	Replace the steering column switch unit Op. 5550A12
2	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the diagnostic equipment (Examiner or Examiner Plus) to the diagnostic socket, select the Body Computer function in CONTROL UNITS TEST and check that there are no faults.	End of diagnosis	Fault persists	Replace the Body Computer Op.   5505A32