2751072 - K06 TRIP METER DOES NOT ZERO
After turning the ignition ON, the milometer is not zeroing using the special button| Results of the tests | ||||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
| Connect the Examiner diagnostic equipment to the diagnostic socket and check that there are no faults at the Instrument Panel | Continue to Step 2 | There are errors | Proceed in accordance with the instructions given by the diagnostic equipment | |
| 2 | ELECTRICAL CIRCUIT CHECK | All OK | Problems met | Operation |
| Disconnect
the ABS electrical connection and test the efficiency of the braking
system with the aid of a service rig. check
| Continue to Step 3 | Connections defective, earth or supply defective | Restore the correct connections See E4010 INSTRUMENT PANEL If necessary, replace the wiring | |
| 3 | Continue as instructed by the tester | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | . | ||