2751119 - N35 I.C.S. TELEPHONE DEVICE NOT WORKING

This table does not deal with faults caused by a malfunction of the service provider or the telephone function.

		Results of the tests
1	CHECKING ELECTRICAL EQUIPMENT	All OK	Problems met	Operation
	Remove the radio and check that the telephone connector is correctly inserted in its housing	Continue to Step 2	Connector disconnected	Insert the connector in its housing
2	CHECKING ELECTRICAL EQUIPMENT	All OK	Problems met	Operation
	Check the following at the telephone connector: the power supply connections with the radio See   E3580  PREPARATION FOR CELLULAR TELEPHONE	Continue to Step 3	Fault in positive supply and/or earth	Replace the component involved (if a fuse is involved, search for the cause of the problem)
			Connections with the radio faulty	Restore the connections
3	AERIAL CHECK	All OK	Problems met	Operation
	Check the continuity of the coaxial aerial cable and the actual aerial - check aerial amplifier supply See   E3580  PREPARATION FOR CELLULAR TELEPHONE	Continue to Step 4	Aerial cable faulty	Renew/replace the aerial lead
			Amplifier supply leads faulty	Renew/replace the supply lead
			Amplifier supply leads faulty	Replace the amplifier and/or aerial
4	Continue as instructed by the tester	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Replace the telephone support