169002083 - 7095A85 SIDE MOULDING/STORAGE COMPARTMENT ON ROOF R R (SUV)

Removing ( Refitting ) Unscrew the aerial and remove.1. Prise up the carrier bar rear panels and remove.2. Undo the retaining bolts. 1. Use a blade to cut the adhesive and remove the moulding/oddment holder.

	Description	Code	Function
-	Knife	1.878.077.000	Removing the moulding

Refitting ( Removing ) Carefully clean the area of the roof where the moulding/oddment holder will be bonded and remove any previous adhesive residues (if bonded to the same door).1. Position the moulding/oddment holder in its seat and secure with adhesive.

If the moulding/oddment holder removed previously is re-used, clean off any adhesive traces and apply a new adhesive with the same properties.

1 Tighten the fixing bolts.2. Fit the rear carrier bar panels in their seats.