169002235 - 7055A26 MOULDING ON REAR WHEEL ARCH (ONE) LH OR RH R R (SUV)

Removing ( Refitting ) Position the vehicle on a lift.If working from the left side of the vehicle, remove:    Op. 4450B06 LEFT REAR WHEEL R R    Op. 7055B48 REAR WHEEL ARCH LINER (ONE), LEFT OR RIGHT - R.R.[left side]If working from the right side of the vehicle, remove:    Op. 4450B08 RIGHT REAR WHEEL R R    Op. 7055B48 REAR WHEEL ARCH LINER (ONE), LEFT OR RIGHT - R.R.[right side] 1. Working from inside the wheel arch compartment, unscrew the bolts.
1. Use a blade to cut the adhesive.
DescriptionCodeFunction
-Knife1.878.077.000Remove the moulding
2. Release the fastening studs.3. Remove the moulding.
Refitting ( Removing ) Thoroughly clean the area of the wheelarch where the moulding will be bonded and remove any previous adhesive residues (where fastened to the same wheelarch).1. Position the moulding (1a) in its seat and secure using adhesive (1b) and studs (1c).
If the moulding removed previously is re-used, clean off any adhesive traces and apply a new adhesive with the same properties.
1. Working from inside the wheel arch compartment, tighten the bolts.
If working from the left side of the vehicle, fit:    Op. 7055B48 REAR WHEEL ARCH LINER (ONE), LEFT OR RIGHT - R.R.[left side]    Op. 4450B06 LEFT REAR WHEEL R RIf working from the right side of the vehicle, fit:    Op. 7055B48 REAR WHEEL ARCH LINER (ONE), LEFT OR RIGHT - R.R.[right side]    Op. 4450B08 RIGHT REAR WHEEL R RRemove the vehicle from the lift.