2752390 - 0510A10 cylinder compression - check for loose spark plugs or injectors

Disconnect the electrical connections for the engine management control unit (  Refer to op.. 1060G80  ds electric injection control unit - r r ).

	Name	Connector
-	Engine management control unit	M10

Remove one fuel injector (  Refer to op.. 1060F10  fuel injectors ). Fit the dummy injector in the seat of the removed injector.

	Name	Country
1	Dummy injector	1.870.900.500

Insert the test instrument in the seat of the dummy injector.Via the starter motor, make the engine execute a few revolutions while holding down the accelerator and clutch pedals.

Make sure that there are no leaks from the test instrument's connection.

Repeat the test on the remaining cylinders, making sure to reset the instrument each time.Check that the cylinders' pressure readings do not differ excessively. Connect the electrical connection for the engine management control unit (  Refer to op.. 1060G80  ds electric injection control unit - r r ).

	Name	Connector
-	Engine management control unit	M10