2752528 - 1084A42 engine oil pressure warning light switch - r + r

Removing ( Refitting ) Disconnect the battery negative terminal.1. Disconnect the electrical connection from the engine oil pressure warning light switch.

	Name	Connector
1	Engine oil pressure sensor	K28

2. Undo and remove the engine oil pressure warning light switch from the cylinder head. Refitting ( Removing ) 1. Fit the engine oil pressure warning light switch in place and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	-	OIL PRESSURE W/L	M14	(Cylinder head side) 2.9 ÷ 3.5

2. Connect the electrical connection to the engine oil pressure warning light switch.

	Name	Connector
2	Engine oil pressure sensor	K28

Connect the battery negative terminal.