2752554 - 1092A12 crankshaft pulley - r+r for versions with air conditioner

Removing ( Refitting ) Remove the car from the ramps. - 4450B04  right front wheel r r - 1092G11  Engine components single drive BELT - R.R. for versions with air conditioning1. Fit a pin (8 mm diameter) through the hole on the gearbox, to be used for countertorque. 1. Undo the bolts (1a) and remove the crankshaft pulley (1b). Refitting ( Removing ) 1. Fit the crankshaft pulley (1a) in place and secure it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	CRANKSHAFT PULLEY	M8	(Crankshaft flange side) 2.3 ÷ 2.8

Remove the pin from the hole on the gearbox. - 1092G11  Engine components single drive BELT - R.R. for versions with air conditioning - 4450B04  right front wheel r rRemove the car from the ramps.