Removing
(
Refitting
)
Disconnect the battery negative terminal.1. Disconnect the electrical connection from the air flow meter.
Name
Connector
1
Air flow meter
K41
2. Loosen the band and disconnect the the turbocharger air inlet
sleeve from the rigid pipe, air flow meter side.
1. Remove the air filter (1a) complete with air flow meter (1b)
by releasing from the underlying pins and then from the rear fastenings.
1. Disconnect the quick-release connector for the front fuel return
pipe, fuel filter side.2. Disconnect the rapid attachment for the front fuel return pipe,
rear fuel return pipe side.
1. Disconnect the rapid attachment on the front fuel return pipe,
single fuel manifold pipe side.2. Undo the bolts (2a) and open the pipe passage channel (2b).3. Remove the front fuel return pipe (3a) after releasing it from
the bands (3b).
Refitting
(
Removing
)
Place the front fuel return pipe back in
its housing and fix it using the bands. Close the pipe passage channel and secure
it with the bolts.Connect the rapid connector for the front
fuel return pipe, rear fuel return pipe side.Connect the quick-release connector for
the front fuel supply pipe, fuel filter side.Connect the rapid attachment of the front
fuel return pipe, single fuel manifold pipe side.Fit the air filter complete with air flow
meter.Connect the air intake sleeve to the turbocharger,
air flow meter side, and tighten the band.Connect the electrical connection to the
air flow meter.
Removing
(
Refitting
)
Disconnect the battery negative terminal.1. Disconnect the electrical connection from the air flow meter.
