Removing
(
Refitting
)
Disconnect the battery negative terminal.1. Disconnect the electrical connection from the air flow meter.
Name
Connector
1
Air flow meter
K41
2. Loosen the band and disconnect the air inlet hose to the turbocharger.
1. Remove the air filter (1a) complete with air flow meter (1b)
by releasing from the underlying pins and then from the rear fastenings.
1. Release the electrical wiring (1a) from the band (1b) and move
it aside.2. Disconnect the electrical connection from the excess pressure
sensor.
Name
Connector
2
Turbocharging sensor
K82
3. Undo the bolt (3a) and remove the over-pressure sensor (3b).
Refitting
(
Removing
)
Fit the excess pressure sensor in place
and fix it using the bolt.Connect the electrical connection to the
excess pressure sensor.
Name
Connector
-
Turbocharging sensor
K82
Fit the electrical wiring in place and
fasten it using the band.Fit the air filter complete with air flow
meter in place.Connect the air inlet hose to the turbocharger
and tighten the band.Connect the electrical connection to the
air flow meter.
Removing
(
Refitting
)
Disconnect the battery negative terminal.1. Disconnect the electrical connection from the air flow meter.
