2752608 - 1060G20 Engine RPM SENSOR - R.R.

Removing ( Refitting ) Disconnect the battery negative terminal.1. Disconnect the electrical connection for the rpm sensor.

	Name	Connector
1	Rpm sensor	K46

2. Undo the bolt (2a) and remove the engine rpm sensor (2b). Refitting ( Removing ) 1. Fit the rpm sensor (1a) in place and secure it tightening the bolt (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	ENGINE RPM SENSOR	M6	(Engine crankcase side) 0.8 ÷ 1.0

2. Connect the electrical connection for the rpm sensor.

	Name	Connector
-	Rpm sensor	K46

Connect the battery negative terminal.