Removing
(
Refitting
)
Remove the car from the ramps.Disconnect the battery negative terminal.1. Disconnect the electrical connection from the air flow meter.
Name
Connector
1
Air flow meter
K41
2. Loosen the band and disconnect the the turbocharger air inlet
sleeve from the rigid pipe, air flow meter side.
1. Remove the air filter (1a) complete with air flow meter (1b)
by releasing from the underlying pins and then from the rear fastenings.
1. Disconnect the electrical connection from the cam angle sensor.
Name
Connector
1
Timing sensor
K47
2. Undo the bolt (2a) and remove the cam angle sensor (2b).
Refitting
(
Removing
)
Fit the cam angle sensor in place and fix
it using the bolts.Connect the electrical connection to the
cam angle sensor.
Name
Connector
-
Timing sensor
K47
Fit the air filter complete with air flow
meter in place.Connect the air intake sleeve to the turbocharger,
air flow meter side, and tighten the band.Connect the electrical connection to the
air flow meter.
Name
Connector
-
Air flow meter
K41
Connect the battery negative terminal.Remove the car from the ramps.
Removing
(
Refitting
)
Remove the car from the ramps.Disconnect the battery negative terminal.1. Disconnect the electrical connection from the air flow meter.
