Removing
(
Refitting
)
Disconnect the battery negative terminal.1. Disconnect the electrical connection from the air flow meter.
Name
Connector
1
Air flow meter
K41
2. Loosen the band and disconnect the the turbocharger air inlet
sleeve from the rigid pipe, air flow meter side.
1. Remove the air filter (1a) complete with air flow meter (1b)
by releasing from the underlying pins and then from the rear fastenings.
1. Disconnect the electrical connection from the fuel pressure sensor.
Name
Connector
1
Fuel pressure sensor
K83
2. Undo and remove the fuel pressure sensor.
Refitting
(
Removing
)
1. Fit the fuel pressure sensor in place and tighten it to the recommended
torque.2. Connect the electrical connection to the fuel pressure sensor.
Name
Connector
-
Fuel pressure sensor
K83
Fit the air filter complete with air flow
meter in place.Connect the air intake sleeve to the turbocharger,
air flow meter side, and tighten the band.Connect the electrical connection to the
air flow meter.
Removing
(
Refitting
)
Disconnect the battery negative terminal.1. Disconnect the electrical connection from the air flow meter.
