1084B40 ENGINE OIL DELIVERY PIPE TO TURBOCHARGER - R + R - Fiat - PANDA - eLearn

2752631 - 1084B40 engine oil delivery pipe to turbocharger - r + r

) Disconnect the battery negative terminal.1. Disconnect the electrical connection from the air flow meter.

	Name	Connector
1	Air flow meter	K41

2. Loosen the band and disconnect the air inlet hose to the turbocharger.

1. Remove the air filter (1a) complete with air flow meter (1b) by releasing from the underlying pins and then from the rear fastenings.

1. Undo the connectors (1a) and remove the engine oil supply pipe to the turbocharger (1b).

Refitting ( Removing

) 1. Fit the engine oil supply pipe to the turbocharger (1a) in position and secure by tightening the connectors (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Connector	OIL DELIVERY PIPE TO TURBO	M10	(Turbocharger side/engine oil heat exchanger) 1.1 ÷ 1.3

Fit the air filter complete with air flow meter in place.Connect the air inlet hose to the turbocharger and tighten the band.Connect the electrical connection to the air flow meter.

	Name	Connector
1	Air flow meter	K41

Connect the battery negative terminal.