Removing
(
Refitting
)
Disconnect the battery negative terminal.1. Disconnect the electrical connection from the air flow meter.
Name
Connector
1
Air flow meter
K41
2. Loosen the band and disconnect the the turbocharger air inlet
sleeve from the rigid pipe, air flow meter side.
1. Remove the air filter (1a) complete with air flow meter (1b)
by releasing from the underlying pins and then from the rear fastenings.
1. Open the fastening band (1a) and release the pipe (1b).
1. Opening the fastening band (1a) and release the power unit coolant
pipe (1b) and remove it.
Refitting
(
Removing
)
Fit the power unit coolant pipe in position.Renew the fastening bands.Renew the metal bands fastening the pipe
to the heater and to the EGR. - 0010T21 coolant check density and top up if necessaryFit the air filter complete with air flow
meter in place.Connect the air intake sleeve to the turbocharger,
air flow meter side, and tighten the band.Connect the electrical connection to the
air flow meter.
Removing
(
Refitting
)
Disconnect the battery negative terminal.1. Disconnect the electrical connection from the air flow meter.
