- Connect switch AD-266 between the wiring and the ABS sensor
- Insert the diagnostic equipment probes in bushes 1 and 2 of the adapator.- After the diagnostic equipment has been switched on, enter the "INSTRUMENT" ambient.- Under the "VOLTMETER" function select 20V as the end of scale and 2 seconds as the basic time.- Manually rotate the wheel and when the speed is 4-6 km/h press the START button.Check that the signal acquired looks the one illustrated without "holes".
Regular signal between sensor-flywheel (Rotation speed: 4-6 Km/h)
Irregular signal due to the presence of magnetic slag (point X) on the flywheel magnetic race (Rotation speed 4-6 km/h).
Irregular signal due to the presence of magnetic slag (point X) on the flywheel magnetic race (Rotation speed 4-6 km/h).
Irregular signal for wheel rotating after Start
Irregular signal due to wheel stopped during acquisition
