169002234 - 7055A24 MOULDING ON FRONT WHEEL ARCH ONE LH OR RH R R (SUV)

Removing ( Refitting ) Position the vehicle on a lift.If working from the left side of the vehicle, remove:    Op. 4450B02 LEFT FRONT WHEEL R R    Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R RIf working from the right side of the vehicle, remove:    Op. 4450B04 RIGHT FRONT WHEEL R R    Op. 7055B66 ENGINE BAY DUSTGUARD PROTECTION IN RIGHT FRONT WHEEL ARCH R R 1. Working from inside the wheel arch compartment, unscrew the bolts. 1. Use a blade to cut the adhesive.

	Description	Code	Function
-	Knife	1.878.077.000	Remove the moulding

2. Release the fastening studs.3. Remove the moulding. Refitting ( Removing ) Thoroughly clean the area of the wheelarch where the moulding will be bonded and remove any previous adhesive residues (where fastened to the same wheelarch).1. Position the moulding (1a) in its seat and secure using adhesive (1b) and studs (1c).

If the moulding removed previously is re-used, clean off any adhesive traces and apply a new adhesive with the same properties.

1. Working from inside the wheel arch compartment, tighten the bolts. If working from the left side of the vehicle, fit:    Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R R    Op. 4450B02 LEFT FRONT WHEEL R RIf working from the right side of the vehicle, fit:    Op. 7055B66 ENGINE BAY DUSTGUARD PROTECTION IN RIGHT FRONT WHEEL ARCH R R    Op. 4450B04 RIGHT FRONT WHEEL R RRemove the vehicle from the lift.