Removing
(
Refitting
)
Disconnect the battery negative terminal.1. Disconnect the electrical connection from the air flow meter.
Name
Connector
1
Air flow meter
K41
2. Loosen the band and disconnect the the turbocharger air inlet
sleeve from the rigid pipe, air flow meter side.
1. Remove the air filter (1a) complete with air flow meter (1b)
by releasing from the underlying pins and then from the rear fastenings.
1. Disconnect the quick-release connector for the front fuel supply
pipe, fuel filter side.
1. Disconnect the quick-release connector for the front fuel supply
pipe, pressure pump side.2. Undo the bolts (2a) and open the pipe passage channel (2b).3. Remove the front fuel supply pipe (3a) after releasing it from
the bands (3b).
Refitting
(
Removing
)
Fit the front fuel supply pipe in place
and secure it using the band.Close the pipe passage channel and secure
it with the bolts.Connect the quick-release connector for
the front fuel supply pipe, fuel filter side. Connect the quick-release connector for
the front fuel supply pipe, pressure pump side.Fit the air filter complete with air flow
meter in place.Connect the air intake sleeve to the turbocharger,
air flow meter side, and tighten the band.Connect the electrical connection to the
air flow meter.
Removing
(
Refitting
)
Disconnect the battery negative terminal.1. Disconnect the electrical connection from the air flow meter.
