3310A30 FRONT BRAKE CALIPER (ONE) - R.R. - Fiat - PANDA - eLearn

2752709 - 3310A30 FRONT BRAKE CALIPER (one) - R.R.

) Place the car on a ramp.Remove the left front wheel. - 4450B02 left front wheel r rOr the right front wheel. - 4450B04 right front wheel r rRemove the protective cap on the brake caliper bleed valve.Connect the collection system (pipe and reservoir) to the bleed valve on the brake caliper. Operate the brake pedal until the brake fluid reservoir is empty.1. Unscrew the fixing clip (1a) and undo brake pipe connector (1b).2. Open the retaining clip (2a) on the brake pipe (2b).3. Unscrew the bolts (3a) and remove the complete front brake caliper (3b).

Refitting ( Removing

) Fit the front brake caliper on the disc.Tighten the bolts that secure the caliper to the bracket to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT BRAKE CALIPER ASSEMBLY	M10 x 1.25	5.7

Tighten the pipe connector to torque, secure the pipe on the suspension strut and fit the brake pipe fixing clip.

	Fastening	Component	Ø	Value(daNm)
-	Connector	FITTING FOR PIPE TO CALIPER	M10	1.6

- 0010T64 brake and or clutch fluid check level and top up as necessary - 0010T65 hydraulic brake system bleed airFit the left front wheel. - 4450B02 left front wheel r rFit the right front wheel. - 4450B04 right front wheel r rRemove the vehicle from the lift.