184000306 - INTRODUCTION - GEARBOX

CONSTRUCTION FEATURES

Manual gearbox positioned transversely in the engine compartment, including 3 shafts supported by bearings with the gears always meshed and a final drive reduction. The twin cable external control is made from plastic materials with excellent properties (resistance to fatigue, self-lubrication capacity, reduced weight).

The following different types of gearboxes are adopted according to the engine type:

  • C.514 5 speed gearbox for 1.2 16v and 1.4 16v;
  • C.510 5 speed gearbox for 1.3 JTD;
1, Manual gearbox with differential2, Manual gearbox external controls2, Speedometer sensor The 3rd speed gear (on the main shaft and currently in 'neutral') allows the transmission of the drive from the intermediate shaft to the layshaft and then to the differential, thereby completing the kinematic chain for first speed. The 3rd speed gear (on the main shaft and currently in 'neutral') allows the transmission of the drive from the intermediate shaft to the layshaft and then to the differential, thereby completing the kinematic chain for second speed.