184000371 - INTRODUCTION - ACCESSORIES (HI-FI)

RADIO

The vehicle is equipped with a radio system available in different trim levels:

• radio preparation;
• radio with audio CD player, LCD and outside CD Changer managment (if fitted);
• CONNECT built-in radio-telephone-navigator    Characteristic of working principle 5580P CONNECT PANEL

A sophisticated Bose HIFI system with special HIFI speakers and an outside amplifier can also be fitted, as described below.The radio is a CAN node through which information is exchanged with the Body Computer and with the other electronic units.

Radio preparation

The vehicle can be fitted, on request, with a simple AFTERMARKET preparation, (opt. 082) which includes a power supply for the radio not present on the vehicle, but installed in the after market, in accordance with the following standard ISO pin out (connector A):

PIN	FUNCTION
1	n.c. (mute)
2	n.c.
3	n.c.
4	+30
5	n.c. (aerial supply)
6	+ lights
7	+15
8	earth

The radio installed in the AFTERMARKET is therefore not a CAN node through which information is exchanged with the Body Computer and with the other electronic units.

The vehicle is equipped with preparation comprising:

• radio
• front speakers (woofers in the doors and separate tweeters);
• rear speakers located in the rear side panel;
• cables connecting the radio with the speakers;
• aerial with support mounted at the rear of the roof, coaxial cable and supply lead for aerial amplifier.

Specifications

Dimensions: 1 DIN box with 2 DIN front panel

Modules included:

• Radio
• Audio CD Player + CD ROM with MP3 (if fitted)
• LCD graphic display
• External CD CHANGER system (if present).

The diagram below shows examples of the display for various CD with MP3 radio functions:The technical specifications are listed below:

GENERAL SPECIFICATIONS:

• music audio power: 4x35w
• 5 band graphic equalizer
• easy to manage menu for the adjustment of the radio settings and any external interfaces (CD-Changer)
• remote control from the steering wheel
• possibility of interface with outside CD Changer.
• volume control according to the speed (via CAN)
• possibility of activating certain commands via voice recognition module.

RADIO SPECIFICATIONS:

• RDS
• RDS - TMC (Traffic Message Channel)
• EON (Enhanced Other Network)
• TA (Traffic Announcements)
• band tuning: USW (FM); MW; LW ;

possibility of programming:

• 24 FM stations (6 of which can be memorized through autostore);
• 6 MW stations;
• 6 LW stations;
• 6 stations that can be memorized through autostore on the AMST band

2 scan modes (short lislten to a station and automatic transfer to the next):

• scanning the frequency band used;
• scanning programmed stations.
• possibility of selecting programmes via PTY (on FM bands only).
• local/distant setting

AUDIO SPECIFICATIONS:

• bass
• balance
• fader
• loudness
• treble
• Hi-Fi system active control

5 equalizing curves:

• best (manufacturer''s equalizing data);
• rock;
• jazz;
• classical;
• manual (can be set via 5 band graphic equalizer)
• soft mute

CD SPECIFICATIONS:

• motorized loading and ejection
• TPM function (Track Program Memory)
• shuffle function
• repeat
• skip
• pause / stop
• compression: activates the dynamic compression circuit.
• CD naming: CD identification (20 max)

CD MP3 SPECIFICATIONS:

• play list function (such as TPM for audio CD)
• functions associated with the play list:
• scan;
• repeat (one track or all);
• pause;
• skip
• maximum number of MP3 tracks considered for each CD: 999 (if the number of MP3 files contained in the CD ROM is higher than this limit, only the first 999 will be considered).
• compression: activates the CD noise dynamic reduction circuit.

Blaupunkt 10 disc CD changer specifications (in the luggage compartment):

• scan function
• repeat function
• shuffle function
• CD naming
• compression: activates the dynamic reduction circuit.

OPERATION

The table below contains descriptions of all the functions that can be activated for both models:

BUTTON FUNCTIONS
Button N°	Symbol	Description of functions	Tuner	CD/CD-MP3 Player	CD Changer
		Short Button Press	Long Button Press
T01	1	1. Preset recall2.TPM On/Off3.Pause On/Off4.Repeat On/Off5.Mix On/Off6. MP3 Info function	1. Memorizing preset2. TPM memorizing/reset3.Pause On/Off4.Repeat On/Off5.Mix On/Off6. MP3 Info function	1. Preset recall1. Memorizing preset	Button 1. TPM On/Off TPM MemorizingButton 2. TPM resetButton 3.Pause On/OffButton 4.Repeat On/OffButton 5.Mix On/Off	3.Pause On/Off4.Repeat On/Off5.Mix On/Off
T02	2
T03	3
T04	4
T05	5
T06	6
T07	PTY	PTY On/Off	Programme Type Display	1.PTY On/Off2. Programme Type Display	PTY On/Off	PTY On/Off
T08	AF-TA	TA On/Off	AF On/Off	1.TA On/Off2.AF On/Off	1.TA On/Off2.AF On/Off	1.TA On/Off2.AF On/Off
T09	BAND	Radio Band Selection	FMT Autostore	1. Radio Band Selection2. FMT Autostore	1. Missing2.Autostore	1. Missing2.Autostore
T10	MENU	Access to Menu	Preselection scan	1. Access to Menu2. Preselection scan	Access to Menu	Access to Menu
T11	AUDIO	Selection of Bass, Treble, Balance, Fader	Loudness On/Off	1. Selection of Bass, Treble, Balance, Fader2. Loudness On/Off	1. Selection of Bass, Treble, Balance, Fader2. Loudness On/Off	1. Selection of Bass, Treble, Balance, Fader2. Loudness On/Off
T12		1.Backwards manual search2. Sel. previous PTY, TP, AF programme3.Start of track/sel. of previous track	1.Fast backwards manual search2. Sel. previous PTY, TP, AF programme3. Start of track/rapid sel. of previous track	1.Backwards manual search2. Sel. previous PTY, TP, AF programme	1. Start of track/selection of previous track2. Fast selection of previous track	1. Start of track/selection of previous track2. Fast selection of previous track
T13		1.Backwards auto search2 - Select CD backwards3. Selection of previous folder	1.Continuous backwards auto search2 - Select CD continuous backwards. Continuous selection of previous folder	1.Backwards auto search2.Continuous backwards auto search	1 - Select previous folder2.Continuous selection of previous folder	1.Selection of previous CD2.Continuous selection of previous CD
T14		1. Manual search forwards+2. Selectio of next PTY, TP, AF programme3. Selection of next track	1.Fast forwards manual search2. Sel. next PTY, TP, AF programme3. Rapid selection of next track	1. Manual search forwards2. Selectio of next PTY, TP, AF programme	1. Selection of next track2. Fast selection of next track	1.Selection of next track2. Fast selection of next track
T15		1. Automatic forwards search2 - Select CD fowards3.Selection of next folder	1. Automatic continuous forwards search2 - Select CD continuous forwards3.Continuous selection of next folder	1. Automatic forwards search2. Automatic continuous forwards search	1 - Select next folder2. Fast selection of next folder	1.Selection of next CD2.Continuous selection of next CD
T16	SOURCE	In sequence: Radio, CD, CDC	Source scanning	1. In sequence: Radio, CD,CDC2. FM/AM scan	1. In sequence: Radio, CD,CDC2. CD scan	1. In sequence: Radio, CD, CDC2. CDC scan
T17		CD ejection	CD ejection	CD ejection	CD ejection	CD ejection
R01	ON/OFF	1. Increase/Decrease volume step by step2.Mute On/Off	1.Rapid volume increase/decrease2.Radio On/Off	1. Increase/Decrease volume step by step2. .Rapid volume increase/decrease	1. Increase/Decrease volume step by step2. .Rapid volume increase/decrease	1. Increase/Decrease volume step by step2. .Rapid volume increase/decrease

Anti-theft code

The radio is installed in production and is connected to the CAN in order to establish communication with the Body Computer memorizing an anti-theft code known as an Exchanger Code.At each subsequent Key On (and even if the battery is disconnected), an automatic authentication procedure is repeated: the words "CANCHECK" appear on the radio display: if the result of the Exchange Code check is positive, the system starts working whilst if the codes compared are not the same, a message appears on the display inviting the user to enter the manual code (4 digit Master Code between "1111" and "6666") found on the radio Code Card.

The Master Code is pre-programmed in production and is different for each radio and is also not the same as the Exchanger Code;

The manual Master Code input procedure is necessary only if: replacing the Body Computer for a radio already used on another vehicle with a CAN.

A "new" radio (never previously fitted on other vehicles) can be fitted following an automatic authentication procedure without manually entering the Master Code.

Operation at key off

if the radio is on when the ignition is turned OFF, it goes out automatically fater 20 minutes. It can also be kept

... DATA ERROR - CROPPED TEXT | Ошибка данных - Текст обрезан ...

HIFI AUDIO SYSTEM

Specifications

A HIFI system with special HIFI speakers and an outside amplifier is available on request.The system has been developed ad hoc for this vehicle: the acoustic properties of the passenger compartment have been carefully designed so that the amplifier and the speakers are perfectly in keeping with the passenger compartment offering optimum listening properties.The system is also in perfect harmony with the aesthetics of the vehicle without taking up additional space.The system is installed on the vehicle directly during production with no subsequent operations: the cables are integrated in the vehicle wiring. It is therefore not advisable to make any changes to the original system (e.g. graphic equalizers, additional sub-woofers, extra amplifiers).In addition, the system components (amplifier and speakers) should not be repaired individually, but should be replaced with new components.

COMPOSITION

Unlike the system fitted as standard, the Bose system offers:

• specific midwoofer front speakers with separate tweeters
• specific coaxial rear speakers with tweeters incorporated
• a subwoofer rear speaker with a high power amplifier located in a special ventilated bassbox in the boot.

The other components (radio, aerial, etc.) are the same as the standard system.

Location

The location of the components is illustrated below.1 - Radio2 - Front door midwoofer speakers3 - Tweeter front speakers4 - Coaxial rear speakers5 - Aerial6 - Rear subwoofer speaker with built in amplifier

Bose amplifier

SpecificationsBOSE amplifier:This is a 6 channel hi-fi amplifier with 150W total power with 6 low distortion linear digital amplifiers. The amplifier supplies 4 stereo channels for the speakers in the front and rear doors and two channels for the mobile double coil subwoofer in the rear bassbox. The amplifier is equipped with a built in equalizer and compressor. The high reslution equalizer is set specially for the vehicle passenger compartment taking into account the vehicle absorption and reflection surfaces (seats, windows, dashboard, door panels) and the position of the speakers and the passengers. The single stage technology allows high power with compact dimensions and reduced heat emission compared with traditional linear amplifiers.

The amplifier is equipped with:

• integrated signal processor, which actively adjusts the bass;
• active equalizer with automatic electronic balance at all outputs
• integrated compressor which minimizes distortion

Pinout

Pin	Function
1	Power supply from battery
2	+31 Earth
3	Woofer 2 positive
4	Rear left negative
5	Rear right positive
6	Enablement from radio
7	Front control left negative
8	Front control right negative
9	Rear control left negative
10	Rear control right negative
11	Woofer 1 positive
12	Woofer 1 negative
13	N.C.
14	N.C.
15	Woofer 2 negative
16	Rear left positive
17	Rear right negative
18	N.C.
19	Front control left positive
20	Front control right positive
21	Rear control left positive
22	Rear control right positive
23	N.C.
24	N.C.
25	N.C.
26	Front right negative
27	Front right positive
28	N.C.
29	Microphone positive (N.C.)
30	Microphone negative (N.C.)
31	Front left positive
32	Front left negative

Subwoofer speaker

This is a double coil hi-fi woofer speaker fitted with a special built in bass box which diffuses the sound in an optimum fashion preventing vibration interference.