184000377 - 5580P CONNECT PANEL

CONNECT NAV + DESCRIPTION

Dimensions: 2DIN box with front panel

Modules included:

  • Radio
  • CD player - Audio + CD - MP3 ROM
  • GPS navigation system module
  • GSM phone module
  • Independent navigation with maps
  • Independent navigation with maps
  • Assistance services
  • 256 colour 6.5" TFT display
  • External CD CHANGER system (if present)
  • Built-in voice recognition module
  • WAP protocol

Internal modules

The system modules or the modules to which the system can be connected for obtaining information or requesting services are different.Cd rom playerCONNECT is equipped with a CD ROM player that is able to read and manage CD ROMs and audio CDs. The Audio media may be normal commercial audio CDs or CD ROMs containing files in MP3 format (all levels). Other acceptable ROM media include official Marelli media that contain an updated copy of the CONNECT management software and also the map database required for navigation.Cd changerCONNECT is also designed to be connected to an external CD Changer and to accept analogue audio output.Gsm moduleThe CONNECT system is equipped with a GSM Dual Band module and micro format SIM Card reader (that allows the user the insert a SIM Card). There is also an external microphone (for hands free use and voice recognition) and preparation for the connection of a hand set.Radio - cd module

General specifications:

  • Music audio power: 4x35W
  • 5 band graphic equalizer
  • Easy to manage menu for the adjustment of the radio settings and any external interfaces (CD-Changer)
  • Remote control from the steering wheel
  • Possibility of interface with external CD-Changer via ASCI-BUS line.
  • Volume control according to the speed (via CAN)
  • If a voice recognition module is fitted, several of the commands can be voice-activated.

Radio specifications:

  • RDS
  • RDS - TMC (Traffic Message Channel)
  • EON (Enhanced Other Network)
  • TA (Traffic Announcements)
  • Tuning on the following bands: USW (87.5- 108 MHz) (FM), MW (153- 279 kHz) (AM), LW (531- 1602 kHz) (AM)
  • Possibility of programming: 24 FM stations (including 6 stored by autostore), 6 MW stations, 6 LW stations, 6 stations that can stored by autostore on the MWST band.
  • 2 scan modes (short lislten to a station and automatic transfer to the next): Scan on the frequency band used; Scan of stored stations.
  • Possibility of selecting programmes via PTY (on FM bands only).
  • Local/Distant setting.

Audio specifications:

  • Bass
  • Balance
  • Fader
  • Loudness
  • Treble
  • HI-FI system active control
  • 5 equalizing curves: BEST (manufacturer''s equalizing data) Rock, Jazz, Classical, MANUAL (can be set using 5 band graphic equalizer)
  • Soft mute.

CD specifications:

  • Motorized loading and ejection
  • TPM function (Track Program Memory)
  • Shuffle function
  • Repeat
  • Skip
  • Pause
  • Compression: activates the CD noise dynamic reduction circuit
  • CD Naming: CD identification (max 30, including CDC).

MP3 CD specifications:

  • Play List function (such as TPM for Audio CD)
  • Functions associated with the Play List: Scan, Repeat (one or all tracks), Pause, Skip
  • Maximum number of MP3 tracks considered for each CD: 999 (if the number of MP3 files contained in the CD ROM is higher than this limit, only the first 999 will be considered).
  • Compression: activates the CD noise dynamic reduction circuit

CD Changer specifications

  • Scan function
  • Repeat track or entire cartridge function
  • Shuffle CD or shuffle all function (one CD or all CDs)
  • CD Naming:
  • Compression: activates the CD noise dynamic reduction circuit
  • Management of controls from steering wheel
  • The audio module can be managed by the buttons on the steering wheel.

Management of controls from steering wheel

  • The audio module can be managed by the buttons on the steering wheel.

System activation

The CONNECT system may be activated in two different modes:

  • Automatic activation with the ignition key ON
  • Manual activation by means of ON button
  • Emergency manual activation by means of SOS button
Automatic activationWhen the ignition key is turned to MAR position, the CONNECT system turns on automatically to make all the functions described in this chapter active or enabled.Manual activation

With the ignition key in STOP position, the CONNECT system comes on when the ON button is pressed to make the following modes available:

  • MAIN
  • AUDIO
  • NAV
  • TEL
  • SOS and SERVICE (Targasys)
In this mode, the SETUP and TRIP modules can be activated but it is not possible to validate any parameter change, language change or measurement unit change or any other type of adjustment envisaged by the CONNECT system. These limitations are normal when the system is activated by means of the ON button. When the vehicle is not running (key OFF), the data transmission devices inside the vehicle are not operational. When ignition key is turned ON, the system begins to work.

System deactivation

The CONNECT system may be activated in two different modes:

  • deactivation independent of the ignition key
  • deactivation dependent on the ignition key
To choose the deactivation mode, see the Power OFF submenu in the SEPUP menu.Deactivation independent of the ignition keyWhen this mode is active, the CONNECT system may be turned off by pressing the ON button.The display shows the message DEACTIVATION PROCEDURE IN PROGRESS, WAIT A FEW MOMENTS.
With the ignition key OFF, the system deactivates with a delay of 20 minutes if a system destination has been set or if a phone conversation is in progress.
Deactivation dependent on the ignition keyWhen this mode is active, the CONNECT system may be turned off by turning the ignition key to STOP.

Languages available

The following languages are available for both strings of displayed text (menus) and navigation voice messages: Italian, English, French, German, Spanish and Portuguese.The voice recognition unit language may be set independently of the menu and navigation message language. The same languages are available.

FRONT OF THE CONNECT NAV+

Front view

.

Key to pushbuttons

There are 28 buttons and two rotary selectors (a wheel and a pushbutton) on the front panel of the CONNECT.Some keys perform multiple functions that depend on the system operating conditions active at that time.Activation of the selected function is controlled, in some cases, by the length of time for which the button is pressed (short or long push) as described in the following table.
KeyShort press on key (less than 2 second)Prolonged press on key (longer than 2 seconds)
1Activation or interruption of the Voice Recognition functionActivation or interruption of the Voice Recognition function. Activation of the Voice Memo function, this can be interrupted by a further short or long press on the button
2Choice of audio source:FM1/2/3/AST –MW/LW/AMAST – CD – CDC-
3- Send the selected phone call- Reselect the last number dialled and then press the key with 5 seconds to send a call to the number- Accept incoming phone call- Refuse incoming phone call- Stop dialling a new phone number- Interrupt a phone call already in progress
4Activate TRIP on-board computer mode-
5Radio mode: search for the first radio station at a lower frequencyCD mode: select the previous track.MP3 mode: select the previous track.Radio mode: activate scanning function for lower frequencies, station scanning will stop at the first station with an audible signal.CD mode: select the previous track.MP3 mode: move to the previous 10 tracks or the previous folder.
6Radio mode: search for the first radio station at a higher frequencyCD mode: select the next track.MP3 mode: select the next track.Radio mode: activate scanning function for higher frequencies, station scanning will stop at the first station with an audible signal.CD mode: select the next track.MP3 mode: move to the next 10 tracks or the next folder.
7CD housing-
8Eject navigation CD-ROM or audio CD-
9Play/stop for CD/CDCPause for CD/CDC
10SIM CARD housing eject key-
11SIM CARD housing-
12Activate SOS mode (assistance functions and services)-
13Targasys mode activation-
14Exit from a selection menu or leave a submenu of a higher menu-
15Knob for selecting the required function. Press to confirm-
16Multifunction key. Function depends on active mode.The function is always identified by graphic buttons that appear on the display. In some cases, the graphic button area may cover one or more adjacent multifunction keys: the function of the keys under this area is the same-
17Knob for adjusting volume level. Press to turn the system on/off-
18Activate navigation modeActivate/deactivate the MUTE function for navigation information
19Activate phone modePhone on/off
20Activate Audio modeActivate/deactivate the MUTE function for audio sources
21Activate Main modeDark mode: The display is darkened completely.The display is lit again by pressing the MAIN, TEL, SOS buttons or by receiving a phone call

CONTROLS ON THE STEERING WHEEL

The controls for the main functions of the CONNECT are duplicated on the steering wheel for greater ease.
1 - + and - buttons: volume adjustment2 - voice recognition button (VOICE)3 - SOURCE button4 - SCAN + and - buttons:5 - phone button TEL6 - function selection wheel7 - MODE buttonActivation of the selected function is controlled, in some cases, by the length of time for which the button is pressed (short or long push) as described in the following table.
KeyShort press on key (less than 2 second)Prolonged press on key (longer than 2 seconds)
VOL +/-Raises or lowers volume levelRaises or lowers volume level
VOICEActivation or interruption of the Voice Recognition functionActivation of the Voice Memo function, this can be interrupted by a further short or long press on the button
SOURCESelect operating mode: FM1/2/3/AST MW/LW/AMAST - CD - CDC-
SCAN +/-The “SCAN +/-” buttons allow:- In Radio mode: to search for the next or previous radio station- In CD/MP3/CDC mode: to move to the previous or next track-
TEL- Send the selected phone call- Redial the last number called and then press the key within 5 seconds to send a call to the number.- Accept incoming phone call- Refuse incoming phone call- Stop dialling a new phone number- Interrupt a phone call already in progress
MODEThe "MODE" button makes
... DATA ERROR - CROPPED TEXT | Ошибка данных - Текст обрезан ...