184000801 - 1008B30 GEARBOX SIDE MOUNT FLEXIBLE BLOCK - REPLACE

Removing ( Refitting ) Proceed with removal    Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACEProceed with removalProceed with removal 1048A32 sleeve from air cleaner to intake manifold - r + r Proceed with removalProceed with removal    Op. 5530B10 BATTERY - R+R1. Fit the tool (1a), complete with support mountings (1b).2. Fit the tools (2a) and (2b), then connect them using links (2c) to the brackets fitted previously.    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R. 7055A43 central front grille - r r

NameCountry
1aCrossmember1.870.595.000

NameCountry
1bSupport mountings1.870.650.000

NameCountry
2aCrossmember1.860.851.000

NameCountry
2aVertical support1.871.001.300
1. Undo the nut fixing the gearbox side rigid support to the flexible mounting.2. Undo the bolts (2a) and remove the flexible mounting of the power unit gearbox side rigid engine mount (2b).
Refitting ( Removing ) 1. Refit the flexible mounting of the gearbox side power unit rigid support (1a) in its seating and tighten the bolts (1b) to the specified torque.

FasteningComponentØValue(daNm)
1bBoltGEARBOX SIDE RUBBER MOUNTM8(Bodyshell side) 2.3 ÷ 2.8
2. Undo the nut fixing the gearbox side rigid power unit support to the flexbile mounting to the specified torque.

FasteningComponentØValue(daNm)
2NutPOWER UNIT GEAR BOX END RIGID MOUNTM12(Flexible mounting side) 8.1 ÷ 9.9
Remove the safety tools used for supporting the power unit.

NameCountry
-Crossmember1.870.595.000

NameCountry
-Support mountings1.870.650.000

NameCountry
-Crossmember1.860.851.000

NameCountry
-Vertical support1.871.001.300
Proceed with refitting 7055A43 central front grille - r r .Proceed with refitting    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with refitting    Op. 5530B10 BATTERY - R+R.Proceed with refitting 1048A32 sleeve from air cleaner to intake manifold - r + r .Proceed with refitting    Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE.