184001107 - 1820B20 MASTER CYLINDER (PUMP) - R + R

Removing ( Refitting ) Position the vehicle on the ramp.Proceed with removal    Op. 4450B02 LEFT FRONT WHEEL R R.Proceed with removal    Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R..1. Working from the passenger compartment, place the clutch pedal in the end of travel position then release the retainers securing the locking device to the pedal.2. Release the master cylinder push rod from the locking device.
1. Release the pipe between the master cylinder and the clutch operating cylinder (1a) from the bands (1b).2. Lift up the retaining clip (2a) and disconnect the pipe between the master cylinder and the operating cylinder (2b), master cylinder side.
Collect the brake-clutch fluid which comes out in a suitable container.
3. Loosen the band and disconnect the flexible pipe from the clutch reservoir to the master cylinder, master cylinder side.4. Undo the bolts (4a) and remove the master cylinder (4b).
Refitting ( Removing ) Place the clutch master cylinder back in its housing and fix it tightening the bolts to the recommended torque.

FasteningComponentØValue(daNm)
-BoltCLUTCH FLUID MASTER CYLINDERM6(Bodyshell side) 0.6 ÷ 1.0
Connect the flexible pipe from the clutch reservoir to the master cylinder, master cylinder side and tighten the clutch.Fit the pipe between the master cylinder and the operating cylinder fully home in its seat on the clutch master cylinder and secure with the retaining clip.Fasten the pipe between the master cylinder and the clutch operating cylinder using the bands.Connect the master cylinder push rod to the locking device.Connect the clutch pedal to the locking device using the clips.Proceed with refitting    Op. 0010T64 BRAKE AND OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.Proceed with refitting 0010T67 hydraulic clutch system bleed air .Proceed with refitting    Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R..Proceed with refitting    Op. 4450B02 LEFT FRONT WHEEL R R.Remove the car from the ramps.