184001886 - 7210E56 TAIL-GATE

Removing ( Refitting )     Op. 7015A04 TAILGATE INTERIOR PANEL - R+R    Op. 7015A58 INTERNAL TAILGATE MOULDING (ONE) - R+R    Op. 5550D16 THIRD STOP LIGHT - R+R    Op. 7015B10 SINGLE TAILGATE LOCK - R+R OR REPAIR WITH PANEL/PROTECTION REMOVED1. Disconnect the electrical connections (1a, 1b, 1c, 1d, 1e).
DescriptionConnector
1aLeft no. plate lightSee F50 LEFT NUMBER PLATE LIGHT
DescriptionConnector
1bRight no. plate lightSee F51 RIGHT NUMBER PLATE LIGHT
DescriptionConnector
1cSwitch on boot outer handleSee
DescriptionConnector
1dRearscreen wiper motor    See N16 REAR WINDOW WIPER MOTOR
2. Disconnect the heated rear windscreen electrical connections.
DescriptionConnector
2Heated rear windscreenSee
DescriptionConnector
2Heated rear windscreenSee
3. Disconnect the wiring from the retainers.4. Connect one sensor to the end (4a) of the wiring and one sensor to the other end (4b) to faciliate the subsequent refitting of the wiring.5. Release the cable duct (5a) from the tailgate opening (5b).6. Extract the wiring (6a) from the tailgate passing through the opening (5b).7. Support the tailgate appropriately and, using a screwdriver, release the lifting devices upper retaining clips (without detaching them).8. Undo the bolts for the hinges.9. Remove the tailgate. Refitting ( Removing ) Check that the tailgate is not damaged.Position the tailgate and screw in the bolts fixing it to the hinges without fully tightening them.Attach the support devices and fit the clips.Refit the wiring inside the tailgate using the sensors connected previously.Fit the cable duct and secure the wiring to the retainers.Connect the all electrical connections.    Op. 7015B10 SINGLE TAILGATE LOCK - R+R OR REPAIR WITH PANEL/PROTECTION REMOVED    Op. 5550D16 THIRD STOP LIGHT - R+R    Op. 7015A58 INTERNAL TAILGATE MOULDING (ONE) - R+R    Op. 7015A04 TAILGATE INTERIOR PANEL - R+R    Op. 7015A14 TAILGATE - ADJUST CENTRING AND PROFILE - INCLUDES HINGE AND COMPARTMENT SEAL ADAPTATION