1004D40 ENGINE - POSITION ON STAND AND REMOVE - Lancia - MUSA - eLearn

184000789 - 1004D40 ENGINE - POSITION ON STAND AND REMOVE

) Support the engine in order to work on it in safety.1. Use the automatic belt tensioner to slacken auxiliary drivebelt tension.2. Remove the auxiliary drivebelt by prising off its drive pulleys.

1. Disconnect the electrical connections (1a) from the air conditioner compressor and leads (1b) from the alternator.

	Name	Connector
1a	Air conditioning compressor engagement electro-magnet	L20

	Name	Connector
1b	Alternator	A10

2. Undo the nuts (2a) and the bolts (2b), then remove the mounting complete with air conditioning compressor (2c).3. Remove the engine mount, timing side.

1. Undo the fixing bolt (1a) and extract the timing sensor (1b).2. Disconnect the electrical connections (2a) for the ignition coils, then undo the bolt (2b) fixing the coils to the cylinder head.

	Name	Connector
2a	Ignition coil	A30

3. Remove the ignition coils.

Secure and support the engine for hoisting using a hydraulic hoist fitted with suitable chains.1. Position the engine bracket on the timing side.

	Name	Country
1	Bracket	1.861.001.032

1. Position the engine bracket on the flywheel side.

	Name	Country
1	Bracket	1.861.001.034

Secure the engine to the overhaul stand using service bolts.Release the engine from the hoist.

Refitting ( Removing

) Secure and support the engine for hoisting using a hydraulic hoist fitted with suitable chains.Undo the fixing bolts and remove the engine mounting brackets on the rotating stand.

	Name	Country
-	Bracket	1.861.001.032

	Name	Country
-	Bracket	1.861.001.034

Undo the fixings and remove the supporting tools from the engine, then place them down.Fit the ignition coils in the seats in the cylinder head, then tighten the fixing bolts.Fit the timing sensor on the cylinder head and tighten the fixing bolt.Connect the electrical connections to the ignition coils.

	Name	Connector
-	Ignition coil	A30

Fit the timing side engine mount

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ENGINE MOUNT TIMING SIDE	M10 x 1.25	6

Fit the mount with alternator and air conditioner compressor.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ALTERNATOR SUPPORT	M10 x 1.25	5

	Fastening	Component	Ø	Value(daNm)
-	Nut	ALTERNATOR SUPPORT	M10 x 1.25	5

Connect the alternator leads.

	Name	Connector
-	Alternator	A10

Connect the electrical connection to the air conditioner compressor

	Name	Connector
-	Air conditioning compressor engagement electro-magnet	L20

Fit the auxiliary drivebelt to the drive pulleys, then turn the automatic tensioner and fit the belt.Remove the hooks and support devices positioned previously.