184000800 - 1008B10 POWER UNIT FRONT MOUNT (TIMING SIDE) FLEXIBLE BLOCK - REPLACE
Removing
(
Refitting
)
Position a hydraulic jack under the crankcase sump.1. Undo nuts (1a) and (1b), then remove the timing side power unit support flexible mounting (1c).
Refitting
(
Removing
)
1. Place the timing side power unit support flexible mounting (1a) in position and secure it tightening the nuts (1b) and (1c) to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1b | Nut | FRONT RUBBER MOUNTS | M10 | (Rigid support side) 4.5 ÷ 5.5 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 1c | Nut | FRONT RUBBER MOUNTS | M10 | (Bodyshell side) 4.1 ÷ 5.0 |
