184000836 - 1020D30 OIL SEAL COVER, FLY WHEEL SIDE - R + R AND REPLACE SEALS

Removing ( Refitting ) 1. Undo the flywheel side oil seal cover.2. Cut the sealant between the flywheel side oil seal cover and the crankcase sump using the tool.

NameCountry
2Blade1.870.718.000
3. Remove the flywheel side oil seal cover.
Refitting ( Removing ) Clean residue traces off the contact surfaces between flywheel side oil seal cover and crankcase sump.Apply a strip of specified silicon sealant to the contact surface between the crankcase sump and the flywheel side oil seal cover.

TypeComponentNameQty.
-SealantOIL SUMPSilicon sealant-
1. Place the flywheel side oil cover (1a) back in its housing using the tools (1b) and (1c).

NameCountry
1bGrip1.860.879.000

NameCountry
1cFitting tool1.860.881.000
2. Tighten the bolts for the oil cover, flywheel side, to the recommended torque.

FasteningComponentØValue(daNm)
2BoltFLYWHEEL SIDE COVERM60.9 ÷ 1.1