184000904 - 1040A40 PLUG FOR FUEL FILLER PIPE - R + R

Removing ( Refitting ) 1. Open the access flap to the fuel filler pipe cap.2. Release the safety device for the fuel filler pipe cap from the bodyshell.3. Undo and remove the fuel filler pipe cap.
.
If the fuel filler pipe cap is being replaced, keep the filler following the instructions below.
It is not possible to order a single lock barrel or to order barrels simply by using a part code. When ordering barrels, observe the special procedure set out in 5580E - Special accessories.
1. Release the body of plug (1a) from retainers (1b).2. Break tab (2a) and remove clip (2b) retaining barrel (2c).3. Inset the vehicle key (3a) in the barrel (2c) and extract the actual barrel.
Refitting ( Removing ) .
If a new fuel filler pipe cap is being used, proceed as described below.
1. Insert the vehicle key (1a) in the barrel (1b). Insert the lock barrel (2b), ensuring the seat (2c) engages in the internal retaining clip.Check the cap and lock are working properly.
Place the fuel filler pipe cap in its housing.Fasten the fuel filler pipe cap safety device to the bodyshell.Clean the fuel filler cap access flap.