1080B95 REAR LAMBDA PROBE WITH CATALITIC CONVERTER R R - Lancia - MUSA - eLearn

184001015 - 1080B95 REAR LAMBDA PROBE WITH CATALITIC CONVERTER R R

) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection for the rear Lambda sensor for the catalytic converter.

	Name	Connector
1	Lambda sensor on catalyzer	K17

2. Using a suitable commercial wrench, undo and remove the rear Lambda sensor for the catalytic converter.

Refitting ( Removing

) Place the rear Lambda sensor for the catalytic converter back in its housing and tighten it to the recommended torque Using a suitable commercial wrench

	Fastening	Component	Ø	Value(daNm)
-	-	CONVERTER REAR LAMBDA SENSOR	M18	4.1 ÷ 5.0

Connect the electrical connection for the front Lambda sensor for the catalytic converter.Connect the negative (-) battery terminal.Remove the car from the ramps.