1088E10 RADIATOR COOLING FAN - R + R - Lancia - MUSA - eLearn

184001078 - 1088E10 RADIATOR COOLING FAN - R + R

) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	A1B

Proceed with removal Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACEProceed with removal1. Disconnect the electrical connections from the engine cooling fan resistor. Op. 7210E10 R.R. FRONT BUMPER2. Disconnect the electrical connection for the radiator cooling fan and move the electrical wiring to the side.

	Name	Connector
1	Engine fan adjustment resistor	O10

	Name	Connector
2	Engine electric fan motor	N11

1. Undo the bolt fixing the radiator cooling fan to the bodyshell.

1. Undo the bolts fixing the radiator cooling fan.Release the air conditioning condenser pins from the radiator cooling fan.2. Remove the radiator cooling fan.

Refitting ( Removing

) Place the radiator cooling fan back in its housing and position the air conditioning condenser pins on the actual fan.Tighten the bolts fixing the radiator cooling fan.Tighten the bolt fixing the radiator cooling fan to the bodyshell.Connect the electrical connection to the radiator cooling fan.Connect the electrical connections to the resistor for the engine cooling fan.Proceed with refitting Op. 7210E10 R.R. FRONT BUMPER.Proceed with refitting Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE.Connect the negative (-) battery terminal.Remove the car from the ramps.