184001157 - 2127C13 HEAT PROTECTION BULKHEAD ON GEARBOX HYDRAULIC CIRCUIT LIQUID TANK WITH ELECTRO-HYDRAULIC SELECTION - R.R. (Robotized gearbox)

Removing ( Refitting ) Position the vehicle on the rampEnsure that the ignition key is in OFF position, then disconnect the battery negative terminal (-).

	Name	Connector
-	Battery (+)	See A1B BATTERY (+) ( ENGINE )

1. Disconnect the electrical connection for the electro-hydraulic gear selection system electric pump.

	Name	Connector
1	Robotized gearbox oil pump	See N47 SELESPEED GEARBOX ELECTRIC PUMP

1. Undo bolts (1a) and remove the heat shield partition on the gearbox hydraulic circuit fluid reservoir (1b) complete with intermediate pump supply wiring (1c). Refitting ( Removing ) Place the electro-hydraulic selection gearbox hydraulic circuit fluid reservoir heat shield partition with intermediate pump supply wiring back in its housing and secure it using the bolts.Connect the electrical connection for the electro-hydraulic gear selection system electric pump.Connect the negative (-) battery terminalRemove the car from the ramps.