184001160 - 2127C43 ACTUATOR HYDRAULIC ASSEMBLY AIR BLEEDER VALVE - R.R. (Robotized gearbox)

Removing ( Refitting ) Connect the Examiner and carry out the procedure to depressurise the gear actuation hydraulic circuit.

To ensure depressurisation is successful, ensure:

there are no errorsthe brake pedal is maintained depressed

Disconnect the electrical connection for the electric pump. The circuit will return to service pressure (45 bars) when the key is turned ON.

Proceed with removal    Op. 5530B10 BATTERY - R+R.Proceed with removal    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..1. Undo the bolt securing the bracket (1a) and move aside the electrical wiring (1b). 1. Undo and remove the actuation hydraulic unit bleed valve. Refitting ( Removing ) Fit the actuation hydraulic unit bleed valve.Secure the electrical wiring bracket.Proceed with refitting    Op. 0010T47 HYDRAULIC SYSTEM FLUID FOR GEARBOX WITH HYDRAULIC SELECTION CHECK LEVEL AND TOP UP IF NECESSARY.Proceed with refitting    Op. 0010T48 HYDRAULIC SYSTEM FOR GEARBOX WITH HYDRAULIC SELECTION BLEED AIR.Proceed with refitting    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with the refitting    Op. 5530B10 BATTERY - R+R