184001162 - 2127C52 ODD AND EVEN GEAR ENGAGEMENT SOLENOIDS RR (Robotized gearbox)

Removing ( Refitting ) Proceed with removal    Op. 5530B10 BATTERY - R+R.Proceed with removal    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with removal    Op. 2127C13 .Proceed with removal    Op. 2127C40 HYDRAULIC SPEED SELECTION HYDRAULIC ACTUATOR UNIT AND CLUTCH - R R.1. Disconnect the electrical connections (1a) and (1b), undo the bolts (1c) and remove the even and odd gear engagement solenoids (1d).
NameConnector
1aSolenoid 1 (gear engagement) See L51 SOLENOID 1 (GEAR SHIFT)
NameConnector
1bSolenoid 2 (gear engagement) See L52 SOLENOID 2 (GEAR ENGAGEMENT) ( AUTOMATIC TRANSMISSION )
Remove the O-rings from the seats of the even and odd gear engagement solenoids.
Refitting ( Removing ) Fit a new O-ring in the specific groove on the seating of the even and odd gear engagement solenoids.Fit the even and odd gear engagement solenoids in their seatings and tighten the fixing bolts.Connect the electrical connections of the even and odd gear engagement solenoids.Proceed with refitting    Op. 2127C40 HYDRAULIC SPEED SELECTION HYDRAULIC ACTUATOR UNIT AND CLUTCH - R R.Proceed with refitting    Op. 0010T47 HYDRAULIC SYSTEM FLUID FOR GEARBOX WITH HYDRAULIC SELECTION CHECK LEVEL AND TOP UP IF NECESSARY.Proceed with refitting    Op. 0010T48 HYDRAULIC SYSTEM FOR GEARBOX WITH HYDRAULIC SELECTION BLEED AIR.Proceed with refitting    Op. 2127C13 .Proceed with refitting    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with refitting    Op. 5530B10 BATTERY - R+R.Connect an Examiner, initialise the gear engagement/selection positions and check the engagement travel is correct.