184001163 - 2127C54 GEAR SELECTION SOLENOIDS RR (Robotized gearbox)

Removing ( Refitting ) Proceed with removal    Op. 5530B10 BATTERY - R+R.Proceed with removal    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with removal    Op. 2127C13 .Proceed with removal    Op. 2127C40 HYDRAULIC SPEED SELECTION HYDRAULIC ACTUATOR UNIT AND CLUTCH - R R.1. Disconnect the electrical connection (1a), undo the bolts (1b) and remove the gear selection solenoid (1c).

	Name	Connector
1a	Solenoid 3 (gear engagement)	See L53 SOLENOID 3 (GEAR SELECTION)

Refitting ( Removing ) Fit the gear selection solenoid in its seating and tighten the fixing bolts.Connect the electrical connection for the gear selection solenoid.Proceed with refitting    Op. 2127C40 HYDRAULIC SPEED SELECTION HYDRAULIC ACTUATOR UNIT AND CLUTCH - R R.Proceed with refitting    Op. 0010T47 HYDRAULIC SYSTEM FLUID FOR GEARBOX WITH HYDRAULIC SELECTION CHECK LEVEL AND TOP UP IF NECESSARY.Proceed with refitting    Op. 0010T48 HYDRAULIC SYSTEM FOR GEARBOX WITH HYDRAULIC SELECTION BLEED AIR.Proceed with refitting    Op. 2127C13 .Proceed with refitting    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with refitting    Op. 5530B10 BATTERY - R+R.Connect an Examiner, initialise the gear engagement/selection positions and check the engagement travel is correct.