2127E52 HYDRAULIC SELECTION GEARBOX INPUT SHAFT SPEED SENSOR - R R (ROBOTIZED GEARBOX) - Lancia - MUSA - eLearn

184001167 - 2127E52 HYDRAULIC SELECTION GEARBOX INPUT SHAFT SPEED SENSOR - R R (Robotized gearbox)

) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 Battery

1. Disconnect the electrical connection (1a) and undo the electro-hydraulic selection gearbox input shaft speed sensor (1b) and remove it.

	Description	Connector
1a	Gearbox input speed sensor	See K78 TRANSMISSION OUTPUT SPEED SENSOR

Refitting ( Removing

) - Fit the electro-hydraulic selection gearbox input shaft speed sensor.- Connect the electrical connection to the electro-hydraulic selection gearbox input shaft speed sensor.- Connect the negative battery terminal.- Remove the vehicle from the lift.