184001171 - 2127E50 HYDRAULIC SELECTION GEARBOX CIRCUIT PRESSURE SENSOR - R R
Removing
(
Refitting
)
Connect the Examiner and carry out the procedure to depressurise the gear actuation hydraulic circuit.Proceed with removal Op. 5530B10 BATTERY - R+R.Proceed with removal Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..1. Disconnect the electrical connection (1a), and remove the pressure sensor (1b) from the gear actuation hydraulic unit.| Name | Connector | |
|---|---|---|
| 1a | Pressure sensor on transmission | See K96 PRESSURE SENSOR ON TRANSMISSION |
Refitting
(
Removing
)
Refit the pressure sensor in its seating.Connect the electrical connection to the pressure sensor.Proceed with refitting Op. 0010T47 HYDRAULIC SYSTEM FLUID FOR GEARBOX WITH HYDRAULIC SELECTION CHECK LEVEL AND TOP UP IF NECESSARY.Proceed with refitting Op. 0010T48 HYDRAULIC SYSTEM FOR GEARBOX WITH HYDRAULIC SELECTION BLEED AIR.Proceed with refitting Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with refitting Op. 5530B10 BATTERY - R+R.